The crusher is composed of frame, motor, feeding hopper, damage chamber, fixed toothed disc, movable toothed disc, annular sieve plate, vibrating equipment, discharge port, etc. The fixed gear plate and the movable gear plate are placed in concentric circles of unequal diameter, which will damage the material. In the process of destruction, a lot of dust will be produced, so the equipment is generally equipped with powder collection and dust collection equipment.

When the material inlet enters the machine, it is immediately hit by the high-speed rotating hammer (tooth piece), breaking the casting material and hitting the broken circuit board. When the material is repeatedly impacted in the crusher and the continuous hole size is small, the lower screen can pass through the screen hole, and the fan blade into the room rotates, resulting in negative pressure. The aspirated material is blown to the designated settlement equipment through the fan blade.

The crusher is equipped with three rings of gear plate moving on the main shaft, the upper cover of the crushing chamber and the fixed gear plate, and the fixed gear plate is equipped with a fixed gear ring with double rings. The movable gear plate and the fixed ring gear are staggered each other. When the spindle is running at high speed, the movable gear plate runs, and the material he throws into the head is the gap. In materials and teeth or materials interact with each other, shear, friction combined effect to obtain comminution. The crushing chamber of the finished product screen enters into the capture bag, and the coarse material continues. It can be used to adjust the crushing degree of raw materials. The screen, the machine structure is simple, durable, easy to use and maintain, high output, stable operation.
1. The rotor crusher is not only suitable for dry and fragile materials, but also for some toughness and fiber materials.
2. Strong friction, the temperature of the material in the machine's large bore rises, leading to dehydration.
3. Crushing does not immediately release, resulting in excessive, crushing waste of energy.
4. The obtained comminution particle size is uniform.

The feeding port of this crusher adopts the hydraulic forced feeding equipment, which can easily feed some large volume and high hardness waste wood into the damage chamber for damage processing. In the past, the feeding operation of the wood breaking machine often needs 2-3 people to complete, while the feeding operation of this multifunctional wood breaking machine only needs one person, which greatly reduces the manpower Cost.