In today's social environment, the competitiveness of the shredder blade industry is increasing, and some manufacturers will replace the inferior ones with good ones. The following crusher manufacturers will briefly introduce how to identify the advantages and disadvantages of shredder blades?

A good grinder cutter is 7000 high and 3000 less. According to the blade material and production process, the price also varies greatly. And customers often ignore this point, always ask about the price, but ignore the blade quality. Even some small-scale mill blade manufacturers cut corners in materials and production process to reduce costs, making it difficult for customers to distinguish between the advantages and disadvantages. In fact, to identify whether the pulverizer cutter is real material, specific analysis, will not be fooled.

1. In the same material and production process, the price of the grinder blade is almost the same. Customers can first understand the market price of raw materials used for the blade, and then compare the quotation of the manufacturer of the grinder cutter. If the price quoted is lower than or slightly higher than the price of the material, it will be a shoddy one.

2. In addition to material, the production process of grinder blade is the processing technology in the production process. In the production of grinder blade, every production process is very important, and the most important one is heat treatment and quenching. Only after a good pulverizer cutter is quenched in furnace twice at least, can the blade material hardness be consistent inside and outside, the edge is tough but not brittle, and durable wear-resistant. Secondly, after purchase, use the metal hardness tester to test whether the hardness is consistent.

The method to select the suitable blade is as follows
First, regardless of the performance of the grinder blade, as long as the cheapest, simply compare the price;
Second, only buy the most expensive, and feel that the most expensive must be the best;
Third, when the processing requirements are met, the ratio of the number of processed workpieces to the price of the grinder blade should be the one who buys the lower one;
Fourth, in order to meet the processing requirements, in addition to calculating the cost performance ratio, the cost of working hours, water and electricity, equipment depreciation and other costs are also calculated in the cost of the workpiece, and then choose the grinder blade.

Obviously, the fourth method is the most ideal, but at present most processing enterprises are difficult to achieve, many are still in extensive operation, and waste phenomenon is serious. The fourth method is obviously the most ideal one when purchasing the grinding blade according to the requirements of machine tools and workpieces. However, it is difficult for most processing enterprises to do so at present, and many of them are still in extensive operation, resulting in serious waste. When choosing the grinding blade, the machine tool and the workpiece should be taken as a reference. If the requirements are met, the cost performance ratio is moderate. Generally, it is difficult to reflect the characteristics of the grinder blade when selecting a very good grinder blade. If the blade of a good machine tool is poor, it can not reflect the advantages of the machine tool, thus wasting equipment resources. In terms of the use of shredder blades, we generally recommend that disposable blades should be used as much as possible to reduce the grinding of grinder blades. At the same time, the cost of the overall grinder blades will certainly be higher than that of disposable blades. When replacing the blade, it is not recommended to replace the damaged blade again. Generally, the blade tip damage will affect the service life of the next tip.